Finally the rear lower control arms arrived from FFR. I now had all the parts needed to install the rear suspension. The installation took about a half a day doing it myself, most of which was maneuvering the heavy rear up and through the frame. After the rear suspension was done I finally was able to see the car off the jack stands and on it’s own wheels for the first time! The pictures didn’t turn out very good because of the sun/shade contrast. See below for pictures:
Picture of rear suspension installed before putting on wheels.
We have a roller! This is the back of the car.
Front of car showing front suspension.
This picture didn’t turn out too good. Side shot of car in driveway.
Another shot that didn’t turn out too good.
The car back in the garage. After this photo was taken I installed the fuel tank.
No comments:
Post a Comment